Skip to main content

Hitachi Cable America

300 Volt Industrial Ethernet Ruggedized Patch Cable

industrial ethernet ruggedized patch cable

Industrial Automation Patch / Jumper Cable

  • 4 Pairs of 24 AWG (19/36) Bare Copper for Flexibility
  • Polyethylene Insulation to .047" Typical
  • TPE Pressure-Extruded Natural Colored Belt Layer Over 4 Pair Core to Provide Roundness, Crush Strength and Pair to Pair Location Consistency
  • Belt Diameter of .240" to .260" Suitable for Use with Sentinel Connectors and Other Connector Designs
  • Polyurethane Jacket Has Excellent Oil & Solvent Resistance
  • Shielded Design has 38 AWG Tinned Copper Wire with 90% Coverage
  • Easy to Terminate Design, Best Results with Overmolded Boots; Final Jacket Diameter .320" Nominal Unshielded; 0.340" Nominal Shielded
  • UL Recognized style 20233, 80 deg C, 300 volts - Flame Test: VW-1
  • RoHS EU Directive 2002 / 95 EC, WEEE EU Directive 2003 / 96 EC

Industrial Cable Features

  • Jacket Material is High Performance Polyurethane, with Excellent Abrasion Resistance, and Superior Oil, Water and Solvent Resistance. It has excellent Cut-Through Performance and Stands up Well in Long Term Continuous Flex Applications.
  • Belt Material is TPE, A Very Robust, Resilient Material that Protects the Core Material From Crush Forces and Excessive Flex Stress
  • The Transmission Pairs are Built on the Same Equipment at HCA that Produces Hundreds of Millions of Feet of TIA/EIA Verified Cable.
Indoor Simplex Interconnect Fiber Optic Cable Diagram

Rugged Industrial Ethernet Cables Description

Part # Description UL
41016 4 Twisted Pairs, 24 AWG (19/36) BC, with Pressure-Extruded TPE Belt. 38 AWG TC - 90% Coverage Braided Shield with Overall Black Polyurethane Jacket 20233 80°C, 300 Volts; UL Type CM
41017 4 Twisted Pairs, 24 AWG (19/36) BC, with Pressure-Extruded TPE Belt and Overall Red Polyurethane Jacket 20233 80°C, 300 Volts; UL Type CM
41249 4 Twisted Pairs, 24 AWG (19/36) BC, Inner TPE jacket and overall Violet LSZH Polyurethane Jacket. UL: 20233, 80°C, 300 Volts; UL Type 20233 80°C, 300 Volts; UL Type CM

Industrial Ethernet Cable Applications

This Cable is intended for Industrial Ethernet Applications Where the Cable May Be Subjected to One or More of the Following

  • Oils, Solvents and Fuels
  • Water and Occasional Steam
  • Abrasion (Rubbing Against Wheels, Solids Tires, Nylon Guides, Etc ...)
  • High Vibration Environments Due to Heavy Motors, Tracking and Vehicular Motion
  • Robotics Applications Where the Unit is Swinging or Sliding
  • Lift, Drop & Vision Applications Such as Sensor or Guidance Units for Fork Trucks
  • Short to Medium Distance Powered Applications Using Power over Ethernet (PoV) Ports
  • Intended for Certain Short to Medium Distance ODVA Ethernet/IP Applications
Distributor Name Phone Number
Anixter 888-264-9784
Heilind Electronics 800-400-7041
Mann Organization 800-553-5543